et-loader

The BEP Smart Battery Hub is a complete all in one battery management system. Simplify battery management with remotely activated switches, voltage sensitive relays and emergency parallel functionality all enclosed in an easy to install, Ignition Protected IPX7 enclosure. Monitoring and transmission of battery voltages and full house bank state of charge over NMEA2000 for integration with multi-function displays.

Features and Benefits
• IPX7 and Ignition Protected
• Monitors and transmits all battery voltages, including house bank state of charge via NMEA2000
• Remotely operated switches via analog inputs or CZone®
• Ultra low power consumption
• Full mechanical override of all switches for safety and servicing

Additional features
• Remotely operated emergency parallel switches
• Bi-directional VSR functionality with configurable cut in and out voltage thresholds
• Monitor up to 2 tank levels, additional battery voltage, temperature or pressure using industry standard sensors
• Status LED’s for all switch outputs and fault indication
• Equipped with advanced core CZone® feature set like load shedding, NMEA2000 switch bank support and many more.
• Support for CZone® logic blocks and data switching
• USB port allows firmware upgrades and full CZone® system updates including configuration
• changes over the NMEA2000 network (no PC or adaptors required)
• 2 x 10A fused 24 hr house outputs with State of Charge monitoring
• Stand-alone functionality for systems without CZone®

BLA CodeDescription
114065BEP Smart Battery Hub Twin Engine
114066BEP Smart Battery Hub Triple Engine
114069BEP Smart Battery Hub Temp Sensor
Specifications
Weight8.4kg (18.5lb)
Power consumption max92mA
Power consumption sleep <3.5mA*<3.5mA*
NMEA2000 connectivity1 x NMEA 2000 Micro-C port, 1 LEN
Warranty period5 years
Operating temperature range- 15C to +55C (-5F to +131F)
Storage temperature range-40C to +85C (-40F to +185F)
DimensionsW x H x D 363.5 x 275.4 x 159.5mm (14.310 x 10.841 x 6.280”)
NMEA2000 PGN OutputFluid Level, Pressure, Temperature, Battery Volts, State of Charge
MonitoringBattery voltage, House current draw, House state of charge
Ingress protectionIPX7
ComplianceCE, ABYC, NMEA, ISO8846/SAEJ1171 Ignition Protected
Nominal Voltage12 or 24V, power harvested from all batteries
Continuous rating:400A
Intermittent rating:700A*
Cranking rating:1450A*
Additional Inputs"1 x Master switch input,
2 x Analogue Inputs: Positive or Negative Switching,
0-32 Volt, 0-1000 Ohm Resistance & 4-20mA Current.
1 x Battery temperature sensor"
BLA CODE

, ,

Category Filter

Battery Management